In this page we will introduce the hardware interface & panel setting options of our entry 6/10K UPS, champ series. 

You can download full version introduction from here:

Champ6K10K_Operation_Part1Download
Champ6K10K_Operation_Part2Download
  • Hardware Interface Introduction
Front
Back
Back
Wiring
This image has an empty alt attribute; its file name is image-10-11.jpg
Connect battery cable

 

  • Panel setting options 1-20 are listed in manual as below
CodeDescriptionBypassACCVCFBatteryBattery Test
01Output voltageY    
02Output frequencyY    
03Voltage range for bypassY    
04Frequency range for bypassY    
05Reserved     
06Reserved     
07Reserved     
08Bypass mode settingYY   
09Battery maximum discharge time settingYYYYY
10Reserved     
11Reserved     
12Reserved     
13Battery voltage CalibrationYYYYY
14Reserved     
15Inverter voltage Calibration YYY 
16Floating charger voltage adjustmentYYYYY
17Constant charger voltage adjustmentYYYYY
18Charger maximum current settingYYYYY
19Battery capacity and groups settingYYYYY
20Backup time calibrationYYYYY
Setting Nr.8
  • Panel setting videos: we have small intro video for setting 1-20. Below we demonstrate Nr. 19 Battery capacity and group setting as example. Full version please download from the link at the top of this page.

Parameter 1:

  • Selected setting number

Parameter 2:

  • Set the battery capacity such as 7AH, 9AH, 10AH, 12AH, 17AH, 26AH, 40AH, 65AH, 100AH and so on.
  • The default value is 9AH.

Parameter 3:

  • Set battery group range from 1 to 6. The default value is 1 group.
  • These parameters are for the battery backup time calculation